PROFESSIONAL FIDELITY

Performer m1000

Our powerhouse mono-block.

With a power amplification of 750 W (4 Ω) [1000 W (2 Ω); 420 W (8 Ω)], this completely analog amplifier easily controls any loudspeaker. Thanks to the VOLTAiR technology the performance of the m1000 is detail-rich, vivid, honest and plain simply beautiful.

Individual design

In addition to the choice of the basic color black, red or silver, there are three more options for each to customize the Performer m1000 to individual design preferences with the black, red and silver decorative panels included in the scope of delivery. The decorative panels adhere with the help of a strong neodymium magnet. No tools are required to exchange them.

Better safe than sorry

The Performer m1000 has a protection circuit against DC voltage and against overheating.

If direct current (DC) is detected, the output stage switches off automatically and the Protect LED lights up red. To protect the m1000 against the unlikely event of overheating, a temperature sensor at the heatsinks continously monitors the temperature of the device. The TEMP LED lights up yellow when the Performer m1000 is getting too hot.

As a result of this the output stage is switched off and the fans run on high-speed until the device has cooled down.

The Performer m1000 has been selected by the
LowBeats editors as their reference power amplifier.

“What can you say? A power amplifier that is also attractive on the outside, strong as an ox and absolutely stable, and which also sounds extremely natural. ... If we were to give out school grades, it would mean a straight A.”

As one calls into the forest,

so it echoes out.

This saying inspired us to send the input signal out again in order to drive another power amplifier in bi-amping mode.

Trim to fit

With reference to the Performer m1000, “fit” means adapted.

You can adapt the input sensitivity in 0.5 dB steps from 0 dB to -5.5 dB. In contrast to a panorama potentiometer in a preamplifier, this trim switch is the more audiophile solution.

In addition, the difference in loudness of loudspeakers can be elegantly compensated in bi-amping mode.

“Surprisingly, these powerhouses act incredibly smooth and fluid even at low volumes. The Performers offer superb craftsmanship and outrageously rich sound for the money.”

Power to the speakers

The loudspeaker binding posts can accommodate banana plugs as well as a stranded wire with a diameter of up to 4 mm.

Thus, any common type of speaker cable and in bi-wiring mode even both connection types can be used together.

However, we do not recommend connecting a speaker with less than 2 ohms impedance.

Trigger me

The standby mode of the power amplifier can be switched on and off using the AMP CTL connection between a preamplifier such as the Director Mk2.

To do this, connect the 3.5 mm phone jacks with a cable with 3.5 mm mono or stereo jack plugs. Thanks to its 12 V trigger input, third party preamps can also switch the Performer m1000’s standby mode on and off.

A class of its own

Conventional solid-state power amplifiers tend to operate in a critical range of the built-in components – this results in unpleasant harmonical artifacts. Tube power amplifiers also distort at their limit but their characteristical behaviour softens this roughness and harshness.

Non the less this is a falsified representation of the sound image. Thanks to VOLTAiR Technology, the Performer m1000 can process much higher levels without even coming near to a critical range. All components constantly operate in the optimal range. The result is a very pleasant, natural and relaxed sound experience. Enjoy your music in every detail and without any listening fatigue.

Full power

The Performer m1000 features individual amplification stages for voltage and power amplification, which ensures a perfect operating of the class-AB amplifier circuit.

Thanks to each stage’s own negative feedback path, it is ruled out that feedbacks from the loudspeaker are interacting with the input stage – this way the SPL VOLTAiR Technology can play out its full performance.

Keep cool

Inside the Performer m1000, six fans usually do nothing at all, because 90 % of the heat is passively dissipated via massive heat sinks. Should it nevertheless become really loud for a really long time, the processor-controlled fans remain virtually inaudible at only 19 dB (A). During power-up, the fans of the Performer m1000 briefly rotate at a higher speed to remove dust of themselves and surrounding components.

Sounds good

With all devices of the Professional Fidelity series we develop not only according to plan, but also by ear. Many important components are installed on the circuit boards using Through-hole technology. This way we can ensure that we can use the best sounding components.

The VOLTAiR Technology

The 120V technology is our reference technology. The 120V technology is unique in the world. It operates at a DC voltage of 120 volts. This is four times that of IC-based semiconductor op-amps. In our Professional Fidelity series, we refer to this unsurpassed technology as VOLTAiR technology.

The highest possible audio quality requires the highest possible audio operating voltage.

The 120V technology works with +/-60 V. To be able to handle such a high voltage, we have developed special proprietary operational amplifiers that can operate with a DC voltage of +/-60 V: the SPL 120V SUPRA operational amplifiers. This high voltage would destroy conventional components and operational amplifiers.

The 120V technology achieves exceptional technical specifications and sonic benefits. Technically, in terms of dynamic range, signal-to-noise ratio and headroom. Sonically, in terms of richness of detail and an absolutely relaxed listening experience. 

By the way, the “120V” in the name of the technology has nothing to do with the local mains voltage from the mains power socket. This is about the operating voltage inside the device with which the audio signals are processed.

The mains voltage from the mains power socket is transformed to the required secondary voltage in the device’s internal linear power supply with toroidal transformer. Rectifiers convert this AC voltage into DC voltage required in the audio device.

VOLTAiR is a composition of the terms Volt and Air. Volt is the unit for electrical voltage and Air stands for the unlimited space the music can breathe in.

VOLTAiR symbolizes the perceived limitless dynamics resulting from high audio voltage.

What exactly is that?

And what does it do?

Good questions need good answers.

And that’s what the 120V technology (VOLTAiR) video gives you.

Play Video

Comparison

Most audio devices work with an internal operating voltage of +/-15 volts and can thus process a maximum input level of +21.5 dBu. If a DAC, for example, has an output level of +22 dBu at 0 dBFS, level peaks of the music material would already cause overloads in the input stage of the device. All components in the audio device often operate at their limits. The result is an unsteady sound that causes stress and faster ear fatigue.

SPL devices with VOLTAiR technology can handle input levels of +32.5 dBu thanks to the higher internal operating voltage of +/- 60 volts – thus offering 12 dB more headroom. All components consequently operate continuously in the optimum operating range. The result is a very pleasant, natural and relaxed sound experience. So you can enjoy your music in every detail.

These diagrams clearly show the superiority of the VOLTAiR technology in comparison to other circuits with lower, common operating voltages.

VOLTAiR is that good

In the lab, we pitted Phonitor xe against the best audio measurement system and found that Audio Precision could not measure VOLTAiR technology.

Play Video

Home is where the heart is

That’s why we manufacture all SPL devices in our own production facility in Niederkrüchten on the Lower Rhine, Germany.

Slimmer is smarter

Play Video
This video guides you step by step through Performer m1000.

Reviews

LowBeats
Hifistatement
Stereo Times
HiFi Sound & Music

Manuals

Play Video
Replacement of defective fuses for 115V
Play Video
Replacement of defective fuses for 230V
Play Video
Changing the mains voltage from 115V to 230V
Play Video
Changing the mains voltage from 230V to 115V

Specifications

Analog Input & Thru: XLR (balanced)

Input impedance (THRU not connected)
20
Common mode rejection (THRU not connected)
-82 dBu
Input sensitivity
12.5 dBu

Loudspeaker Output: Binding posts with ø4mm cable hole (screwable) and banana plug

Output power (RMS, 2 Ω)
1000 W
Harmonic distortion (1 kHz, 2 Ω)
< 0.08 %
Output power (RMS, 4 Ω)
750 W
Harmonic distortion (1 kHz, 4 Ω)
< 0.05 %
Output power (RMS, 8 Ω)
420 W
Harmonic distortion (1 kHz, 8 Ω)
< 0.03 %
Output voltage (peak to peak)
180 V
Output voltage (RMS)
64.6 V
Output impedance (20 Hz – 20 kHz)
< 0.031 Ω
Amplification gain
26 dB
Damping factor (1 kHz, 8 Ohm)
> 280
Frequency range (-3dB)
10 Hz – 80 kHz
Noise (A-weighted)
-123 dB

Internal Linear Power Supply with Shielded Toroidal Transformer

Toroidal transformer
1375 VA
Operating voltage (Input stage)
+/- 60 V
Operating voltage (power stage)
+/- 91 V
Operating voltage for relays, LEDs, AMP CTL
+ 12 V

Mains Power Supply

Mains voltage (selectable, see fuse chamber)
230 V AC / 50; 115 V AC / 60 Hz
Fuse 230 V
T 6.3 A
Fuse 115 V
T 10 A
Power consumption
max. 1375 VA
Idle power consumption
50 W
Stand-by power consumption
< 0.3 W

Dimensions & Weight

W x H x D (width x height incl. feet x depth)
278 x 205 x 375 mm
11 x 8 x 14.8 inch
Unit weight
24.8 kg
54.7 lbs
Shipping weight
29.3 kg
64.6 lbs

Reference: 0 dBu = 0,775V. All specifications are subject to change without notice.

Other Professional Fidelity Series Power Amplifiers and Crossovers

Performer_s1200_front_silver_silver
Performer s1200
Stereo Power Amplifier
Performer-s800_front_silver
Performer s800
Stereo Power Amplifier
Crossover_front_silver
Crossover
Active analog 2-way crossover

Other Professional Fidelity Series Products

Phonitor-xe_front_silver_2560px
Phonitor xe
Headphone Amplifier
Phonitor-x_front_silver_1280
Phonitor x
Headphone Amplifier and Preamplifier
Phonitor_se_front_silver
Phonitor se
Headphone Amplifier
Director-MK2_front_silver_2560
Director Mk2
Preamplifier with DA converter
Diamond_front_silver
Diamond
D/A-Converter
Elector_front_silver
Elector
Analog Preamplifier
Phonitor-x_front_silver_1280
Phonitor x
Headphone Amplifier and Preamplifier
Phonos_front_silver
Phonos
RIAA Phono Preamplifier

Professional Fidelity Brochure

Flag
Flag
Flag
ProAudio
HiFi
ProAudio
HiFi

Calculation of VAT (value added tax)

All prices are displayed by default including the VAT of your country.

If your country cannot be determined via geolocation and you are not logged in as a user with the billing address of your country, the prices are displayed including the VAT of Germany (19%).

What does it actually mean …

In Stock!

The product is in stock in our warehouse in Niederkrüchten, Germany, and will be shipped the same or next working day.

We process the orders after receipt of the order and update the stock in the online shop regularly. If the product is no longer available at short notice due to high order volume, you naturally have the right to withdraw from the purchase (see Right of Withdrawal).

In any case, you will receive an e-mail with details of the delivery and the estimated delivery time.

Available soon!

The product is not in stock in our warehouse in Niederkrüchten, Germany. Usually it will be available again within 5 working days.

In any case, you will receive an e-mail with the details of the delivery and the estimated delivery time.

Of course you have the right to withdraw from your purchase (see Right of Withdrawal).

Currently unavailable.

This product is currently sold out and unavailable.

Was bedeutet eigentlich …

Auf Lager!

Das Produkt ist in unserem Lager Niederkrüchten vorrätig und wird noch am selben oder nächsten Werktag versendet.

Wir arbeiten die Bestellungen nach Bestelleingang ab und aktualisieren den Bestand im Online-Shop regelmäßig. Falls das Produkt wegen hohem Bestellaufkommens kurzfristig nicht mehr verfügbar ist, hast du selbstverständlich das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

In jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Bald verfügbar!

Das Produkt ist in unserem Lager Niederkrüchten nicht vorrätig. Gewöhnlich ist es innerhalb von 5 Werktagen wieder verfügbar.

Auf jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Selbstverständlich hast du das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

Zur Zeit nicht verfügbar.

Dieses Produkt ist derzeit ausverkauft und nicht verfügbar.

Product Condition

A-Stock

Brand-new product from the current product portfolio.

B-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and full warranty.
Only slight to no signs of use.

C-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and legal warranty.
In some cases clear signs of use, which are documented in photos.

NOS

"New Old Stock"
After discontinuation of a product still available new products with full warranty.

Events

Due to Covid19 there are no events scheduled at this time.

Events

Aufgrund von Covid19 sind derzeit keine Events geplant.

Anmelden