PROFESSIONAL FIDELITY

Phonitor e

All essential functions in a stylish, slim housing.

The Phonitor e offers Phonitor Matrix, volume remote control, connection also for balanced headphones, DA converter option and the all superior VOLTAiR technology.

For all headphones

The Phonitor e offers connections for standard headphones with jack plug and for balanced headphones a 4-pin XLR connector.

Thanks to the high output power, all headphones are driven effortlessly.

Volume with remote control

The volume is adjusted with a milled all-aluminium rotary knob. The Alps RK27 “Big Blue” potentiometer provides a pleasant “spoon in honey” turning feeling.

The volume can be adjusted with any infrared remote control. The Phonitor e learns their commands. To do this, press the IR programming button on the back and then the buttons for louder and softer.

Play Video

Learning made easy

This video explains how you can use any infrared remote control to remotely control the volume.

Source selection

A total of five sources can be connected to Phonitor e:

XLR, Cinch, USB, Coax, and Optical

Phonitor e is equipped with RCA connectors and balanced XLR connectors for the analog inputs.

The optional DAC768xs adds three more digital sources: USB, Coax and Optical.

The optional DAC768xs

The converter chip used in the optional digital-to-analog converter is the highly acclaimed AKM AK4490 Velvet Sound™ premium DAC chip, which thanks to its new architecture reproduces the finest sound details.

It converts PCM audio with a resolution of 32 bits and a sampling rate of up to 768kHz, which corresponds to 16 times the CD resolution. Direct Stream Digital is also supported up to a resolution of DSD4 or DSD256. 

The Revolution

in the headphone amplifier is the Phonitor Matrix, with switchable crossfeed, thanks to which you can listen to music with headphones as if you are listening to speakers.

The tiring super stereo effect and the exaggerated reproduction of reverberation rooms and effects are a thing of the past.

Enjoy your music without tiring and exactly as it should be heard.

The Phonitor Matrix, in its largest expansion stage, has three adjustment parameters: Crossfeed, Speaker Angle and Center Level.

In Phonitor e the center level is preset to -1 dB and the speaker angle to 30°.

These are the most common values.

The crossfeed function determines the crosstalk of the channels, the so-called interaural level difference. There are two switch positions C1 and C2 for the intensity of the crossfeed.

Conventional

Phonitor Matrix

Correct

Play Video
Everything you need to know about the Phonitor Matrix
Play Video
Everything you need to hear about the Phonitor Matrix

The VOLTAiR Technology

The 120V technology is our reference technology. The 120V technology is unique in the world. It operates at a DC voltage of 120 volts. This is four times that of IC-based semiconductor op-amps. In our Professional Fidelity series, we refer to this unsurpassed technology as VOLTAiR technology.

The highest possible audio quality requires the highest possible audio operating voltage.

The 120V technology works with +/-60 V. To be able to handle such a high voltage, we have developed special proprietary operational amplifiers that can operate with a DC voltage of +/-60 V: the SPL 120V SUPRA operational amplifiers. This high voltage would destroy conventional components and operational amplifiers.

The 120V technology achieves exceptional technical specifications and sonic benefits. Technically, in terms of dynamic range, signal-to-noise ratio and headroom. Sonically, in terms of richness of detail and an absolutely relaxed listening experience. 

By the way, the “120V” in the name of the technology has nothing to do with the local mains voltage from the mains power socket. This is about the operating voltage inside the device with which the audio signals are processed.

The mains voltage from the mains power socket is transformed to the required secondary voltage in the device’s internal linear power supply with toroidal transformer. Rectifiers convert this AC voltage into DC voltage required in the audio device.

VOLTAiR is a composition of the terms Volt and Air. Volt is the unit for electrical voltage and Air stands for the unlimited space the music can breathe in.

VOLTAiR symbolizes the perceived limitless dynamics resulting from high audio voltage.

What exactly is that?

And what does it do?

Good questions need good answers.

And that’s what the 120V technology (VOLTAiR) video gives you.

Play Video

Comparison

Most audio devices work with an internal operating voltage of +/-15 volts and can thus process a maximum input level of +21.5 dBu. If a DAC, for example, has an output level of +22 dBu at 0 dBFS, level peaks of the music material would already cause overloads in the input stage of the device. All components in the audio device often operate at their limits. The result is an unsteady sound that causes stress and faster ear fatigue.

SPL devices with VOLTAiR technology can handle input levels of +32.5 dBu thanks to the higher internal operating voltage of +/- 60 volts – thus offering 12 dB more headroom. All components consequently operate continuously in the optimum operating range. The result is a very pleasant, natural and relaxed sound experience. So you can enjoy your music in every detail.

These diagrams clearly show the superiority of the VOLTAiR technology in comparison to other circuits with lower, common operating voltages.

VOLTAiR is that good

In the lab, we pitted Phonitor xe against the best audio measurement system and found that Audio Precision could not measure VOLTAiR technology.

Play Video
Play Video
This video guides you step by step through Phonitor e.
Play Video
In this video we introduce you to the entire Professional Fidelity Series.

Reviews

Ear In
LowBeats

Other Professional Fidelity Series Headphone Amplifiers

Phonitor-xe_front_silver_2560px
Phonitor xe
Headphone Amplifier
Phonitor-x_front_silver_1280
Phonitor x
Headphone Amplifier and Preamplifier
Phonitor_se_front_silver
Phonitor se
Headphone Amplifier

Other Professional Fidelity Series Products

Director-MK2_front_silver_2560
Director Mk2
Preamplifier with DA converter
Diamond_front_silver
Diamond
D/A-Converter
Elector_front_silver
Elector
Analog Preamplifier
Phonitor-x_front_silver_1280
Phonitor x
Headphone Amplifier and Preamplifier
Phonos_front_silver
Phonos
RIAA Phono Preamplifier
Performer_s1200_front_silver_silver
Performer s1200
Stereo Power Amplifier
Performer-m1000_front_silver_silver
Performer m1000
Mono Power Amplifier
Performer-s800_front_silver
Performer s800
Stereo Power Amplifier
Crossover_front_silver
Crossover
Active analog 2-way crossover

Other Studio Series Headphone Amplifiers

Phonitor-3_DAC_front
Phonitor 3 DAC
Headphone amplifier, monitoring controller and DAC
phonitor2_front
Phonitor 2
Headphone Monitoring Amplifier
phonitorOneD_front_FeaturedImage
Phonitor One d
Headphone Monitoring Amplifier
phonitorOne_front_FeaturedImage
Phonitor One
Headphone Amplifier
HPm-Side_HPmWebEdit_side_relatedProduct
HPm
Headphone amplifier
Play Video
Replacement of defective fuses for 115V
Play Video
Replacement of defective fuses for 230V
Play Video
Changing the mains voltage from 115V to 230V
Play Video
Changing the mains voltage from 230V to 115V

Specifications

Analog Inputs: XLR (balanced), RCA

Maximum input gain
32.5 dBu
Input impedance
20

Digital Inputs: DAC768xs (optional)

Coaxial SPDIF (RCA), PCM sample rates
44.1/48/88.2/96/176.4/192 kHz
Optical SPDIF (Toslink F06), PCM sample rates
44.1/48/88.2/96/with Glass fibre <1m: 176.4/192 kHz
USB (B), PCM sample rates
44.1/48/88.2/96/176.4/192/352.8/384/705.6/768 kHz
USB (B), DSD over PCM (DoP), sample rates
2.8 (DSD64), 5.6 (DSD128), 11.2 (DSD256) MHz
0 dBFS calibrated to
8 dBu

Balanced Headphones Output: 4-pol XLR (balanced)

Pin wiring
1 = L (+), 2 = L (-), 3 = R (+), 4 = R (-)
Source impedance
0.36 Ω
Damping factor (40 Ω)
180
Frequency range (-3 dB)
10 Hz – 300 kHz
Crosstalk (1 kHz)
-90 dB
THD + N (10 Hz – 22 kHz, 0 dBu)
0.00091 %
Noise (A-weighted)
-98 dBu
Output power (1 kHz, 1% THD, 600 Ω)
2 x 8 W
Output power (1 kHz, 1% THD, 300 Ω)
2 x 3.5 W
Output power (1 kHz, 1% THD, 32 Ω)
2 x 0.7 W
Dynamic range
130.5 dBu

Standard Headphones Output: 6.35 mm (1/4") TRS Jack

Pin wiring
Tip = Left, Ring = Right, Sleeve = GND
Source impedance
0.18 Ω
Damping factor (40 Ω)
180
Frequency range (-3 dB)
10 Hz – 300 kHz
Crosstalk (1 kHz)
-90 dB
THD + N (10 Hz – 22 kHz, 0 dBu)
0.00091 %
Noise (A-weighted)
-103 dBu
Dynamic range
135.5 dB
Output power (1 kHz, 1% THD, 600 Ω)
2 x 2.7 W
Output power (1 kHz, 1% THD, 300 Ω)
2 x 5 W
Output power (1 kHz, 1% THD, 32 Ω)
2 x 1 W

Internal Linear Power Supply with Shielded Toroidal Transformer

Operating voltage for analog audio
+/- 60 V
Operating voltage for relays and LEDs
+ 12 V
Operating voltage for optional DAC768xs
+7 V, +3.3 V

Netzteil

Mains voltage (selectable, see fuse chamber)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 500 mA
Fuse for 115 V
T 1 A
Power consumption
max. 40 VA
Stand-by power consumption
< 0.3 W

Dimensions & Weight

W x H x D (width x height incl. feet x depth)
278 x 57 x 300 mm
11 x 2.24 x 11.81 inch
Unit weight
3.8 kg
8.38 lbs
Shipping weight (incl. packaging)
5 kg
11.02 lbs

Referenz: 0 dBu = 0,775V. Technische Änderungen vorbehalten.

Slimmer is smarter

The Drivers

Mac OS & iOS

No driver installation required for Mac or iOS devices (class compliant).

iOS devices must be connected using the Apple camera adapter.

Windows

To operate with a higher than the standard sample rate this driver installation is required.

 

Windows 10 up to 21H2, 11 up to 22H2
(32/64 bit)

Previous Version

Windows 10 up to 21H2, 11 up to 22H2
(32/64 bit)

Legacy Driver
(last version with Windows 7/8/8.1 support)

Windows 7/8/8.1 and Windows 10 up to (2009/20H2)
(32/64 bit)

Driver for DAC192 (Art.-No. 1670)

Mac OS & iOS

No driver installation required for Mac or iOS devices (class compliant).

iOS devices must be connected using the Apple camera adapter.

Windows

SPL DAC driver for audio playback with sample rates higher than 48kHz.

Windows 7/8/10

ProAudio
HiFi
ProAudio
HiFi

Calculation of VAT (value added tax)

All prices are displayed by default including the VAT of your country.

If your country cannot be determined via geolocation and you are not logged in as a user with the billing address of your country, the prices are displayed including the VAT of Germany (19%).

What does it actually mean …

In Stock!

The product is in stock in our warehouse in Niederkrüchten, Germany, and will be shipped the same or next working day.

We process the orders after receipt of the order and update the stock in the online shop regularly. If the product is no longer available at short notice due to high order volume, you naturally have the right to withdraw from the purchase (see Right of Withdrawal).

In any case, you will receive an e-mail with details of the delivery and the estimated delivery time.

Available soon!

The product is not in stock in our warehouse in Niederkrüchten, Germany. Usually it will be available again within 5 working days.

In any case, you will receive an e-mail with the details of the delivery and the estimated delivery time.

Of course you have the right to withdraw from your purchase (see Right of Withdrawal).

Currently unavailable.

This product is currently sold out and unavailable.

Was bedeutet eigentlich …

Auf Lager!

Das Produkt ist in unserem Lager Niederkrüchten vorrätig und wird noch am selben oder nächsten Werktag versendet.

Wir arbeiten die Bestellungen nach Bestelleingang ab und aktualisieren den Bestand im Online-Shop regelmäßig. Falls das Produkt wegen hohem Bestellaufkommens kurzfristig nicht mehr verfügbar ist, hast du selbstverständlich das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

In jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Bald verfügbar!

Das Produkt ist in unserem Lager Niederkrüchten nicht vorrätig. Gewöhnlich ist es innerhalb von 5 Werktagen wieder verfügbar.

Auf jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Selbstverständlich hast du das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

Zur Zeit nicht verfügbar.

Dieses Produkt ist derzeit ausverkauft und nicht verfügbar.

Product Condition

A-Stock

Brand-new product from the current product portfolio.

B-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and full warranty.
Only slight to no signs of use.

C-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and legal warranty.
In some cases clear signs of use, which are documented in photos.

NOS

"New Old Stock"
After discontinuation of a product still available new products with full warranty.

Events

Due to Covid19 there are no events scheduled at this time.

Events

Aufgrund von Covid19 sind derzeit keine Events geplant.

Anmelden