PROFESSIONAL FIDELITY

Phonos

The RIAA Phono Preamplifier

This phono preamplifier for Moving Magnet (MM) and Moving Coil (MC) pickup systems is based on the legendary Douglas-Self-Design.

MM & MC

There are two pickup systems for record players:

Moving Magnet (MM) and Moving Coil (MC).

Moving Magnet

Moving magnet pickups generate a small voltage by moving a magnet between copper coils. MM pickups have a very high inductance and impedance. The Phonos offers a choice of three capacitors to correct the linearity of the frequency and phase response. The capacitances are 150 pF, 220 pF and 330 pF. In the off-position the capacitance is determined by the capacitance of the cable.

Moving Coil

The MC pickup is also a small electromagnetic generator, but with the magnets firmly anchored and the coils moving between them, i.e. exactly the opposite of the MM pickup.

The output voltage, however, is very low at only a few hundred microvolts and is therefore more sensitive to noise and induced hum. This makes preamplifier design a challenge, because the very low output voltage must be pre-amplified extremely noise-free. Phonos offers one of the most powerful phono preamplifiers for MC systems with up to 71.5 dB preamplification. Thanks to the 120V technology, the preamplifiers are extremely low-noise, linear and phase-locked.

MC pickups have a very low inductance and impedance. 

This means that the effects of cable capacitance (from turntable to preamplifier) are negligible. The impedance, however, is relevant and can be set in six positions: 100, 220, 470, 2.2 k, 4.7 k, and 10 kOhm.

If there is any doubt as to which impedance matches that of the pickup, the impedances can also simply be switched through until the linear frequency response is acoustically determined.

“The SPL Phonos is a phono stage with exceptional character. With so much sonic quality, the price is well below its musical equivalent.”

Perfect level

The gain control can be used to determine the amplifier power, in other words, the output level of the Phonos.
There are three values to choose from.
In the “Norm” position, the gain is +46 dB for MM systems and +67 dB for MC systems.

With the switch set to “-10”, the gain is reduced by 10 dB (MM = +36 dB, MC = +57 dB). This is optimal in combination with standard HiFi equipment that works with a reference level of -10 dBV. 

If the switch is in the “+4” position, the gain is increased by +4 dB (MM = +50 dB, MC = +71 dB).
So the output level is about as loud as that of modern DA-converters at a reference level of 0 dBfs = 15 dBu.

Subsonic Filter

The rumbling of the turntable’s drive mechanism is also amplified by the high amplification of the bass range due to RIAA equalization in playback.

The Phonos offers a switchable subsonic filter to remove this rumble.

“The SPL Phonos is a phono amplifier just the way you want it to be: Completely uncomplicated in operation, robust and intelligently built. With just a few clicks it is tuned to the respective pickup system and then it's ready to go – and how!”

Connections

Gold-plated RCA sockets are available for connecting the turntable and for outputting to a preamplifier such as the Director Mk2 or the Elector. 

A ground connection for the turntable is designed as banana plug socket. The ground lead can be either clamped or plugged in.

“SPL Phonos scores with detail accuracy, natural, full sound color and punchy and superior dynamics – or in the words of LowBeats tv host René Heller: it ‘rocks’.”

Sounds good

With all devices of the Professional Fidelity series we develop not only according to plan, but also by ear. Many important components are installed on the circuit boards using Through-hole technology. This way we can ensure that we can use the best sounding components.

RIAA Equalization

RIAA equalization is a specification for the recording and playback of records proposed by the Recording Industry Association of America (RIAA). The RIAA equalization curves introduced a global de facto industry standard for vinyl records in 1954.

RIAA equalization uses pre-emphasis to reduce low frequencies and boost high frequencies when the record is cut (blue RIAA curve).

The bass is reduced by up to 20 dB to provide more space and longer record play time.

The high frequencies are boosted by up to 25 dB to increase the signal-to-noise ratio between the noise of the record media to the audio signal.

During playback, exactly the opposite happens in the Phonos. The de-emphasis filter (red RIAA curve) compensates for the pre-emphasis and the result is a linear frequency response.

Douglas Self Design

The RIAA equalization of the Phonos was developed according to the recommendations of Douglas Self.

Idea: Many small capacities instead of a few large capacities.

Advantages: The capacitors charge and discharge faster, which results in better resolution and faster impulse response.

Only audiophile Styroflex capacitors are used in the entire RIAA equalizer.

About the person: Douglas Self is a British electronics engineer with a strong penchant for audio. He holds honorary degrees from Cambridge University and teaches psychoacoustics at the University of Sussex.

“The SPL Phonos is an exceptionally good sounding phono preamplifier that has a considerable potential for addiction. Its joy of playing, its enormous dynamics and the accuracy with which it brings out the finest sound structures are always inspiring. The price-performance ratio is excellent.”

The VOLTAiR Technology

The 120V technology is our reference technology. The 120V technology is unique in the world. It operates at a DC voltage of 120 volts. This is four times that of IC-based semiconductor op-amps. In our Professional Fidelity series, we refer to this unsurpassed technology as VOLTAiR technology.

The highest possible audio quality requires the highest possible audio operating voltage.

The 120V technology works with +/-60 V. To be able to handle such a high voltage, we have developed special proprietary operational amplifiers that can operate with a DC voltage of +/-60 V: the SPL 120V SUPRA operational amplifiers. This high voltage would destroy conventional components and operational amplifiers.

The 120V technology achieves exceptional technical specifications and sonic benefits. Technically, in terms of dynamic range, signal-to-noise ratio and headroom. Sonically, in terms of richness of detail and an absolutely relaxed listening experience. 

By the way, the “120V” in the name of the technology has nothing to do with the local mains voltage from the mains power socket. This is about the operating voltage inside the device with which the audio signals are processed.

The mains voltage from the mains power socket is transformed to the required secondary voltage in the device’s internal linear power supply with toroidal transformer. Rectifiers convert this AC voltage into DC voltage required in the audio device.

VOLTAiR is a composition of the terms Volt and Air. Volt is the unit for electrical voltage and Air stands for the unlimited space the music can breathe in.

VOLTAiR symbolizes the perceived limitless dynamics resulting from high audio voltage.

What exactly is that?

And what does it do?

Good questions need good answers.

And that’s what the 120V technology (VOLTAiR) video gives you.

Play Video

Comparison

Most audio devices work with an internal operating voltage of +/-15 volts and can thus process a maximum input level of +21.5 dBu. If a DAC, for example, has an output level of +22 dBu at 0 dBFS, level peaks of the music material would already cause overloads in the input stage of the device. All components in the audio device often operate at their limits. The result is an unsteady sound that causes stress and faster ear fatigue.

SPL devices with VOLTAiR technology can handle input levels of +32.5 dBu thanks to the higher internal operating voltage of +/- 60 volts – thus offering 12 dB more headroom. All components consequently operate continuously in the optimum operating range. The result is a very pleasant, natural and relaxed sound experience. So you can enjoy your music in every detail.

These diagrams clearly show the superiority of the VOLTAiR technology in comparison to other circuits with lower, common operating voltages.

VOLTAiR is that good

In the lab, we pitted Phonitor xe against the best audio measurement system and found that Audio Precision could not measure VOLTAiR technology.

Play Video

Home is where the heart is

That’s why we manufacture all devices in our own production facility in Niederkrüchten on the Lower Rhine, Germany.

Slimmer is smarter

Play Video
This video guides you step by step through the Phonos.

Videos

ANA[DIA]LOG
Interview about VOLTAiR Technology and SPL at High End 2022
SPL Phonos Review - Not for Everyone, but it may be for YOU!

Reviews

Professional Audio
Hifistatement
LowBeats

Manuals

Play Video
Replacement of defective fuses for 115V
Play Video
Replacement of defective fuses for 230V
Play Video
Changing the mains voltage from 115V to 230V
Play Video
Changing the mains voltage from 230V to 115V

Specifications

Analog Input & Output: RCA

Input impedance (MM)
47
Input impedance (MC)
switchable
Output impedance
75 Ω
Frequency range (-3 dB)
10 Hz – 100 kHz
Crosstalk (1 kHz)
-80 dBu

Moving Magnet (MM) Preamplifier

Amplification (Norm)
46 dB
Amplification (-10 dB)
36 dB
Amplification (+4 dB)
50 dB
Capacitance (switchable)
Off, 150 pF, 220 pF and 330 pF
Noise (A-weighted; 46 dB amplification)
-85.3 dBu
Dynamic range
131.3 dB

Moving Coil (MC) Preamplifier

Amplification (Norm)
67 dB
Amplification (-10 dB)
56 dB
Amplification (+4 dB)
71.5 dB
Impedance (switchable)
100 Ω, 220 Ω, 470 Ω, 2.2 kΩ, 4.7 kΩ, 10
Noise (A-weighted, 67 dB amplification)
-61.7 dBu
Dynamic range
128.7 dB

Internal Linear Power Supply with Shielded Toroidal Transformer

Operating voltage for analog audio
+/- 60 V
Operating voltage for relays and LEDs
+ 12 V

Mains Power Supply

Mains voltage (selectable, see fuse chamber)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 0.5 A
Fuse for 115 V
T 1 A
Power consumption
max. 30 VA
Stand-by power consumption
< 0,3 W

Dimensions & Weight

W x H x D (width x height incl. feet x depth)
278 x 100 x 300 mm
11 x 4 x 11.81 inch
Unit weight
3.2 kg
7.05 lbs
Shipping weight (incl. packaging)
4.3 kg
9.48 lbs

Reference: 0 dBu = 0,775V. All specifications are subject to change without notice.

Other Professional Fidelity Series Products

Phonitor-xe_front_silver_2560px
Phonitor xe
Headphone Amplifier
Phonitor-x_front_silver_1280
Phonitor x
Headphone Amplifier and Preamplifier
Phonitor_se_front_silver
Phonitor se
Headphone Amplifier
Director-MK2_front_silver_2560
Director Mk2
Preamplifier with DA converter
Diamond_front_silver
Diamond
D/A-Converter
Elector_front_silver
Elector
Analog Preamplifier
Phonitor-x_front_silver_1280
Phonitor x
Headphone Amplifier and Preamplifier
Performer_s1200_front_silver_silver
Performer s1200
Stereo Power Amplifier
Performer-m1000_front_silver_silver
Performer m1000
Mono Power Amplifier
Performer-s800_front_silver
Performer s800
Stereo Power Amplifier
Crossover_front_silver
Crossover
Active analog 2-way crossover

Professional Fidelity Brochure

Flag
Flag
Flag
ProAudio
HiFi
ProAudio
HiFi

Calculation of VAT (value added tax)

All prices are displayed by default including the VAT of your country.

If your country cannot be determined via geolocation and you are not logged in as a user with the billing address of your country, the prices are displayed including the VAT of Germany (19%).

What does it actually mean …

In Stock!

The product is in stock in our warehouse in Niederkrüchten, Germany, and will be shipped the same or next working day.

We process the orders after receipt of the order and update the stock in the online shop regularly. If the product is no longer available at short notice due to high order volume, you naturally have the right to withdraw from the purchase (see Right of Withdrawal).

In any case, you will receive an e-mail with details of the delivery and the estimated delivery time.

Available soon!

The product is not in stock in our warehouse in Niederkrüchten, Germany. Usually it will be available again within 5 working days.

In any case, you will receive an e-mail with the details of the delivery and the estimated delivery time.

Of course you have the right to withdraw from your purchase (see Right of Withdrawal).

Currently unavailable.

This product is currently sold out and unavailable.

Was bedeutet eigentlich …

Auf Lager!

Das Produkt ist in unserem Lager Niederkrüchten vorrätig und wird noch am selben oder nächsten Werktag versendet.

Wir arbeiten die Bestellungen nach Bestelleingang ab und aktualisieren den Bestand im Online-Shop regelmäßig. Falls das Produkt wegen hohem Bestellaufkommens kurzfristig nicht mehr verfügbar ist, hast du selbstverständlich das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

In jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Bald verfügbar!

Das Produkt ist in unserem Lager Niederkrüchten nicht vorrätig. Gewöhnlich ist es innerhalb von 5 Werktagen wieder verfügbar.

Auf jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Selbstverständlich hast du das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

Zur Zeit nicht verfügbar.

Dieses Produkt ist derzeit ausverkauft und nicht verfügbar.

Product Condition

A-Stock

Brand-new product from the current product portfolio.

B-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and full warranty.
Only slight to no signs of use.

C-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and legal warranty.
In some cases clear signs of use, which are documented in photos.

NOS

"New Old Stock"
After discontinuation of a product still available new products with full warranty.

Events

Due to Covid19 there are no events scheduled at this time.

Events

Aufgrund von Covid19 sind derzeit keine Events geplant.

Anmelden